RSS

Pages

Post Icon

Proton Exora prototypes used to test Campro CFE engine and CVT transmission

Prototype spotted overseas up north | IMG_6489

IMG_6489



 

IMG_6449 IMG_6459 IMG_6487 IMG_6489 IMG_6493 IMG_6512 IMG_6520 IMG_6527 IMG_6530 IMG_6534 IMG_6539 IMG_6542 IMG_6551 
 
 
 

 These days when a Proton test prototype goes out for a drive, sometimes it’ll have a piece of paper on its front or rear windshield that identifies what exactly is being tested.
For example, last month we saw a white pre-FL Proton Saga with a label that describes it as an IAFM+ CVT test vehicle, which we’re assuming means a 1.3 litre IAFM+ engine paired to a CVT gearbox.
This white and black Proton Exora’s label reveals that it is used for general durability testing of a certain powertrain combination. The figures seem to suggest they’re testing what they’re calling a Campro CFE engine paired to a CVT gearbox.
If you recall, we’ve seen the letters CFE used before. At last year’s KLIMS 2010, Proton exhibited an engine called the Campro CFE which was a 1.6 litre inline-4 cylinder engine with a light boost turbocharger that provides a power output equivalent to a 2.0 litre normally aspirated engine. Power figures cited was 138hp at 5,000rpm and 205Nm between 2000rpm to 4,000rpm.
An upgrade in power from a Campro Turbo would explain why the other black and white Exora prototype we saw had rear disc brakes.
We also saw a Proton prototype being tested in a snowy country earlier this year bearing the same “CFE” lettering on a dashboard sticker. The full words on the dashboard in that snow prototype was P3 – CFE TURBO CVT3 ESP.
Look after the jump for all related spyshots. Hat tip to reader Ahmad Afifi for snapping a close-up of the paper on the windscreen and sending this in to us!


exora1


exora2





IMG_6512


IMG_6459


IMG_6527


IMG_6542


IMG_6551


IMG_6493


IMG_6520
IMG_6489
IMG_6539
IMG_6534
IMG_6530
IMG_6487
IMG_6449

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

0 komentar:

Post a Comment